Product Details:
Country of Origin | Made in India |
Product Details:
Filter Medium Material | Activated Carbon |
Length | 20 |
Product Details:
Filtration Capacity (microns) | 1-2 |
Flow Capacity Range | 0-500 cfm |
ROD Frame Type PRE Filter
Construction: are made from high quality synthetic non-woven media, supported by stitching HDPE media on both sides. Media is then stitched and housed inside a rod frame.
For More Details See the attached PDF
Product Details:
Frame Type | Available in flange or box type |
SPECIFICATION | |
Efficiency | Standard HDPE pleated type filters have an efficiency of 90% for 10 micron size particles. Pre filters with an efficiency rating of 80 to 90% to capture 10 micron to 25 micron size particles are also available on order. |
Filtration Class | Filter grades G3, G4, F5 of EN779, ASHRAE 52.2 equivalent MERV 6, 7, 8, 9, 10 and Eurovent EU3, EU4 and EU5 are available |
Frame Type | Available in flange or box type |
Frame Material | Standard model is constructed in Galvanized steel. Other models with Aluminium Anodized/Stainless steel frame with or without powder coating are also available on order. |
Filter Media | HDPE and non-woven synthetic. |
Gasket | No Gasket is installed in standard filter model. Non-woven syntheti/Rubber gasket can be ordered on request |
Separators | None |
Sealant | PU based epoxy |
Face Guard | No face guard with standard model is supplied. On order/request filter can be protected with expanded mesh on both sides |
Nominal Depth | Depth size is available from 1.0 inches to 6 inches (Pre HDPE Pleated and rod type) |
Sizes | Standard size of the filter is 610 x 610 x 50mm in box or flange type. Other sizes are build on order. |
Pressure Drop | Initial pressure drop ~2.5mm WG and recommended final pressure drop is 5-10mm WG |
Operating Conditions | Filter can withstand temperature up to 80ºC and relative humidity of 100% at 0 condensation. Filter is washable or can be cleaned by applying air pressure and reused. |
Application | Athlete Pre filters are most suited for: |
Air Handling Units (AHUs), Air-conditioning systems, Power Plants, Chemical and Fertilizer complexes, Green Houses, Automatic Drain Holes, Paint Shops, Textile Mills, Cement Factories, Laminar Air Flow Units, Biosafety Hoods, Fan Filter Units (FFU), Gas Turbine Industry, Compressor, Diesel Engines, Nuclear Power Station, CD-Rom Production Industry, Picture Tube Production Industry, Semi-conductor Industry, Aeronautical Industry and Miscellaneous Industrial Ventilation. |
Product Details:
Material | Aluminum |
Filtration Grade | Hepa Filter |
Construction: Available in three models: made of galvanized steel, aluminum or stainless steel, these 2" thick baffle grease filters contain two layers of roll formed baffles, equally spaced and without any sharp edges. Spacing creates an airflow that causes grease to collect, drain down the baffles and into collecting trough. Filters are designed to prevent flame from passing through the filter baffles, and are made to withstand different temperature levels.
Application: These filters are used on those kitchen extract systems where functionality and economics are paramount and where the grease load is relatively low.
Product Details:
Filtration Grade | Ulpa Filter |
Medium Material | Microfiber |
Rated Flow(m3/hr) | 0-500 |
Engine Spin-on Filters:
These filters stop the contaminant to enter in the injection system and can be changed easily by unscrewing.
Pressure Spin-on Filters:
Pressure spin-on filters are used for preventing the dust and other contaminants from entering into the engines. These are developed using best grade materials to ensure their smooth functioning and optimum output. Designed in compliance with dimensional accuracy and process suitability, these are well suited for operational demands.
Spin-on Oil Filters:
The precision engineered filters find application in automotive and allied industries for their special features, such as, rigid construction and efficient functionality. Even after having a large variety in different dimensions, we also customize these filters as per the specifications provided by the customers.
Features:
Industrial Spin-on Filters:
These are made using either pleated papers, spun fiberglass filter elements or foam. The other model of these filters is also engineered using elements with a static electric charge or fibers. They are available in both, standard and customized specifications, to meet the various industrial needs.
Automotive Spin-on Filters:
Automotive Spin-on Filters find application in Automotive Industry for the process of filtration. At every stage of production, these are stringently tested on different quality parameters that ensure their efficiency and optimum functionality. These filters are engineered in synchronization with the specifications provided by the renowned engine manufactures including Kirloskar, Caterpillar, Detroit-Diesel, Cummins, Maan & Volvo.
Free Flow Spin-on Filters:
Free Flow Spin-on Filters are used for removing impurities from the oil. Fabricated by utilising latest technology, these are widely appreciated for their excellent performance, durable finish and a reliable service life. With our rich industrial expertise, we also engineer customized solutions as per the individual requirements of our clients.
Construction: The element is constructed using 5 layer of G.I. wiremesh interspaced with 2 crimpled layers and 3 flat layers. The media is supported with expanded metal from both sides as reinforcement and housed usually in 2” deep metal frame (Custom build sizes are also available on order).
Application: These are suitable for different make turbines such as:Triveni, BHEL, Apebellis, DLF, Metropoliton Vickers, Kessels, Thermodyne and other make.
Flow Rate: These can be supplied for different flow rates of turbine such as: 4, 8, 15, 25,40, 45, 80, 100, 200 GPM etc
Construction: Suction Strainer Filters are manufactured using pleated stainless steel mesh screen and rugged steel core centers that are epoxy bonded to heavy gauge connector and end caps.
3.9/5
Rated by 7 Users